Conductive silver ALD coating by Beneq

Conductive coatings

ALD coatings solve many challenges of creating high-quality conformal conductive coatings for complex surfaces. The ability to reliably deposit thin conductive coatings and resistive layers enables new electronics solutions and improves the performance and durability of electronic devices, such as LEDs and OLEDs. Beneq has also used Aluminum doped Zinc Oxide (AZO) TCO coating by ALD as an alternative for the sputtered ITO.

Cases

Contact Lumineq

8 + 2 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.

Application examples

  • Backside Passivation for Image Sensors

    The CMOS Image Sensor (CIS) market keeps its momentum with double digit growth. Main and sub cameras for smartphone remain the leading application while automotive image sensors have quickly established themselves as second largest segment. These emerging...
  • Chip-level ALD moisture barrier for components on tape

    Chip-Level Moisture Barrier

      The challenge The device did not pass the highly accelerated stress test (HAST), which tests the device performance after long term high humidity high temperature exposure. The side-walls of the device had to be protected against moisture. The customer...
  • ALD anti-corrosion coating for semiconductor equipment parts

    Anti-Corrosion Coatings for Equipment Parts

      The challenge The fluorine plasma used in semiconductor process equipment causes corrosion in the chamber parts. The existing protective coatings were porous and had particle generation issues inside the wafer processing chamber. The parts are complex...
  • ALD gate dielectric for GaN power devices

    Gate Dielectric for Power Devices

    Wide bandgap (WBG) power semiconductor devices offer very significant energy efficiency gains in a wide range of applications including automotive, transportation, energy, industrial and consumer. WBG semiconductors such as Gallium Nitride (GaN) and...
  • ALD gate insulator for displays

    Gate Insulator for Oxide-TFT Display

      The challenge Use of Oxide Thin Film Transistor (O-TFT) technology in modern display manufacturing requires a highly conformal and pinhole-free gate dielectric with low hydrogen content. Customer had to find an alternative for PECVD, which was not...
  • Ultimate moisture barriers for OLED micro-displays from Beneq

    Encapsulation of OLED microdisplays

    Beneq developed a thin-film encapsulation nanolaminate coating for a leading Asian OLED microdisplay manufacturer to enable long lifetime for their microdisplays.  
  • Lumineq EL40S electroluminescent display by Beneq

    Insulator for thin film EL displays

    An ALD nanolaminate film was developed for Lumineq displays to create a fully pin-hole free thin film insulator layer.
  • Transparent electrode for displays by Beneq ALD

    Top electrode for transparent display

    Beneq developed an ALD Transparent Conductive Oxide (TCO) for Lumineq's electroluminescent displays to replace the sputtered IDO that was used in the transparent top electrode.
  • ALD is the ultimate moisture barrier for PCBs

    Moisture protection of PCBs

    Beneq developed a low-temperature ALD moisture barrier solution for a leading supplier of electronics for personal safety monitoring to protect the sensitive circuit board components from moisture.
  • Beneq FBR ALD reactor for moisture barriers of phospor powder

    Encapsulation of phosphor powder

    Beneq provided a moisture barrier solution using ALD for FBR (fluidized-bed reactor) for a leading phosphor material manufacturer to protect the sensitive phosphor powders used in LED lighting from moisture.
  • Beneq ALD coatings offer protection against corrosion in LED packaging.

    Anti-corrosion coating for LED packaging

    Beneq's ALD coating solution solved a leading LED manufacturer's silver reflector corrosion problem by both applying ALD to coat the semi-finished wire-bonded LED assemblies, and by protecting the silver surface with nSilver.
  • Beneq ALD provides metal-like coatings for watch parts and fine mechanics.

    Metal-like coatings for watch parts

    Beneq developed a thin ALD-based optical coating for a leading watch parts manufacturer to both provide a specific color and to protect from corrosion.
  • Beneq ALD coatings for wafer-level moisture protection

    Wafer-level moisture barrier for LED

    Beneq provided moisture coating using TFS 200 for a leading LED manufacturer to protect LED dies from moisture and prevent oxidation.
  • Beneq ALD coatings provide high-quality reflectors for LED

    Bottom DBR for LED lighting

    Beneq developed a multi-layer DBR structure on a patterned surface for a leading LED manufacturer.
  • Beneq ALD coatings boost the performance of diffractive gratings

    Filling of diffractive gratings

    Beneq used ALD coating to fill diffractive gratings for a leading optical system manufacturer to keep the gratings free from debris and boost their optical performance.
  • Beneq provides ALD coatings to protect electronics components from corrosion

    Anti-corrosion coating for sensors

    The highly conformal and pin-hole free ALD coating solved a leading sensor manufacturer's sensor corrosion problems without compromising sensor sensitivity.
  • ALD coatings provide interface layers between materials in CIGS panels.

    Buffer layer for CIGS solar panel

    Beneq developed a thin, cadmium-free ALD buffer for the solar panels of a leading CGIS solar panel manufacturer.
  • Beneq ALD coatings increase the lifetime of Li-Ion batteries

    Protective coating for Li-ion batteries

    Beneq's ultra-thin ALD coating solved a leading Li-ion battery manufacturer's battery corrosion challenges by reducing the fading of battery capacity caused by repeated charge and unload cycles.

  • Anti-tarnishing coating for jewelry

    Beneq helped Kalevala Jewelry in preventing the discoloration of silver surfaces by providing the patented nSilver industrial-scale protection solution for an ultra-thin, totally conformal, and fully transparent anti-tarnish coating.
  • ALD is ideal for optical filters on complex surfaces.

    Optical NIR filter on a glass cylinder

    Beneq developed a customized batch ALD process for a CCD sensor -based industrial vision systems supplier to coat their near-infrared (NIR) filters.
  • Beneq ALD optical coatings increase the lifetime of high power lasers

    Optical coatings for high power laser lenses

    Benq developed a conformal high- and low-index multilayer optical coating for a leading provider of high power laser optics and coatings using the TFS 500 batch ALD system.
  • ALD-based conformal moisture barrier coatings for microchannel plates from Beneq.

    Coating of Microchannel Plates (MCP)

    Beneq developed an ALD coating solution for microchannel plates (MCP) for Incom, Inc., the world’s largest supplier of rigid fused fiber optics, to allow for significantly greater secondary electron emission .
  • OLED lighting encapsulation with Beneq TFS 600. Fully automated and vacuum-line integrated. For industrial OLED encapsulation.

    Thin-film encapsulation of OLED lighting

    Beneq developed a conformal, dense, and pinhole-free Al2O3 and TiO2 barrier coating for a leading OLED lighting panel manufacturer to protect OLED panels from humidity.
  • X-ray imaging scintillator plate encapsulation with Beneq Coating Services and Beneq P800 batch coating products

    Thin film encapsulation of scintillator plates

    Beneq developed a conformal, dense, and pinhole-free low temperature Al2O3 and TiO2 barrier coating for a leading scintillator plate manufacturer to protect scintillator materials from moisture and increase product lifetime and reliability.

Proceed to download

2 + 11 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.